We answer hereto the most common questions. But if you don't find the solution to your question or a special request please contact us by mail or fax. We are looking machinery's for drilling small holes in glass and hard stone Several solutions : Hole occasionally (hobbyist & craftsman) 1. From Ø 0.75 mm to 2 mm with electrobrased drill 2. From Ø 0.75 mm to 3 mm with sintered diamond drill Frequently 1. From Ø 0.8mm to 3 mm for flat pieces with core drill fit on a small water flush box with the water go through. 2. From 0.2 mm to 3 mm for free form with Ultra sonic machine using for drilling any kind of metal to drilling hole and free from( you can with this machine made a square hole in glass and hard stone) We would like to polish a piece of glass Nothing more easy with the new product : Impregnate wheels, Lapi orange, Lapi green and Polipur 1. LAPI Orange : The wheel replace old fashion cork wheel with pumice medium sanding abrasive grit. 2. Green LAPI : Imprenagnate wheel to obtain a shiny with a little smoke. 3. POLIPUR : Impregnate wheel to get the finest polish surface. This wheel replace a felt wheel with Cerium powder and can be used after a diamond tool with grit 600 mesh or after Lapi Wheel. Have you the same product for rubis, Sapphires and Emerald ? Yes, we use Diamond plate for sanding and two types of impregnate polishing laps : One to tracks lap for Emerald and all stones with hardness less than 7.5 (mohs scale) and one to tracks lap for Corundum. Both work only with water for a top polish and for a long time.
|
